Automatic Forklift Battery Watering System AWS-36 For 72V 36 Cells
AWS-36 For 72v 36cells Forklift / Golf / Traction Battery
Automatic Battery Watering Systems is composed of Waterfilling
plug,T-piece,Flow indicator,Composite connector,Plastic pipes.
Suitable for battery pack: 12V,24V,36V,48V
Automatic waterfilling plug is connected with a T-piece which is
easy to be installed and can be rotate,Then a T-piece is connected
to the water plastic pipe.There is a lens which can see the top
water level indicator at the top of waterfilling plug,When the
water level is reached, the flow indicator is closed and the
injection is finished.
When the top cover of the automatic watering system is inclined to
open, the temperature of the electrolyte can be measured.
|Model||Watering Head (T-piece)||Flow indicator (filter)||6mm Watering pipe||10mm Watering pipe||End Plug||Female/Male K10||Water Tank|
|AWS-12 (24v)||12pcs||1pc||3m||10m||2pcs||1pc||30L 1pc|
|AWS-18 (36v)||18pcs||1pc||4m||10m||2pcs||1pc||30L 1pc|
|AWS-24 (48v)||24pcs||1pc||5m||10m||2pcs||1pc||30L 1pc|
|AWS-36 (72v)||36pcs||1pc||8m||10m||2pcs||1pc||60L 1pc|
|AWS-40 (80v)||40pcs||1pc||10m||10m||2pcs||1pc||60L 1pc|
Function of the automatic watering system
- The floater of the automatic watering plug can reach correct water
level, when the level rises in the cell, the pressure closes the
valves and prevents further water entering the cell.
- When the system finishes watering, the flow indicator will stop
running and you can see the water-level indicator clearly through
the top of the watering system.
- Besides, the material of floater can avoid damage and
- As for the structure of automatic watering system, there is a
terraced step, when the electrolyte gas rises to the watering plug,
the terraced part can prevent the leakage of the electrolyte gas as
well as quickly cool the electrolyte gas to make them go back to
the storage battery in time.
- Our automatic watering system is safe, reliable and applicable,
besides, from the economic aspect and with the advantage of cost
reduction, energy saving and environment protection, it is the
first-choice product in the present market.
Q: How to properly install the automatic watering system?
A: Our automatic wateringsystem is easy to operate, noneed to
finish watering the electrolyte in the storage battery by hand,
time saving and labor saving, besides, it canextend the service
Q: How to choose proper floaters?
A: According to different storage battery,we have five kinds of
floaters for you to choose.In order to achieve our expectedstandard
and completely reflect the effectiveness of the automatic watering
system, the most important thing is to choose proper floaters.
Q: What to care during the filling process?
theflowindicator withfilter can not only timely indicate whether it
finishes watering, but also avoid unclean impurities entering the
battery to result interruption.
2．The watering pressure should be within the range of 0.2-0.6, no
3．You’d better conduct watering within the specified periods,
because frequent filling will lead to overflowing for too much
water, which will do great damage to the storage battery.
Note:Filling after finishingcharging is the bestideal state,
besides, do not filling before charging.
Meanwhile we will offer detailed installation drawings to ensure
that the clients can correctly install and standardize the