Diode Rectifier Automatic Forklift Battery Charger Industrial SCR
Phase: Three Phases
◆ This charger adopt the up-to-date SCM and serveal decades of
charging experience to develop the SCR series of automatic
intelligent charger,it is widely used for the flooded traction
◆ It can carry out the normal charge and equalising charge
automatically. It is suitable for single shift or multi shifts.
◆ Charge time between 8 and 12 hours
◆ It has a simple structure, reliable performance and lower
operating and maintenance cost.Simple to operate.
This device would be applicable to recharge of lead-acid batteries
which could be used in
various electric vehicle such as power pallet trucks, fork-lift
truck, lift truck, electronic tour bus.
(Ah)Charge time per battery
◆ The charge process can be controlled intelligently with a
microprocesser. optimized charge performance to get a excellent
◆ Wa+Equalising charge curves.
◆The temperature rising during the charge and the evaporating of
the electrolyte at the end of charge can be restricted through the
controlling the charge specifications,this can prolong the battery
life and reduce the lost volume of water, so it can reduce the
◆Intelligent, fully automatic.
◆The advance technology and excellent units guarantee the reliable
quality and perfomance.
◆Self-diagnosis and display panel indicating operational
◆It can be selected to carry out normal charge or one equqlising
charge after normal charge through the adjustment of the switch.
◆It can judge the polanrity reverse and open-circuit automatically
High power factor and low power aberrance.
◆The voltage of the power source can be 220V,230V and 240V or 380V,
400V and 420V,10% deviation of the total power source voltage is
◆Supply frequency 50Hz, 60Hz.
Operation and safety
◆ It can be started and stopped by one key. Once it is started, it
can charge automatically to the end without caring.
◆ It can display the charge information by pressing the information
◆ It has a switch for Wa or Wa+Eq to select the normal charge or
normal with equalizing charge
◆ Detailed charge monitoring display
◆ Optimized design and compact structure. The main units are all
specially produced with excellent safety.
◆ The charger can test the polarity and open-circuit automatically
before charge and then alarm.
◆ Restrict the over-current and over-voltage and then alarm.
◆ The charger can be started and stopped at any time by pressing
◆ The charger will inspect the temperature in the charger during
◆ It is controlled by micro-computer and it can judge a plenty of
the abnomal conditions during charge to protect from overcharge.
◆ Electromagnetic compatibility and electrical safely conform to EC
The soft cable it used has excellent flexibility and insulation.